eSIM diegimas ir aktyvinimas
Prisijunkite per kelias minutes su mūsų paprastu žingsnis po žingsnio vadovu iPhone ir Android įrenginiamsGet connected in minutes with our easy step-by-step guide for iPhone
Vienas bakstelėjimas ir esate prisijungę
Paprasčiausias būdas: iPhone (iOS 17.4 ar naujesnė) ir Android 10+ telefone atidarykite eSIM laišką arba My eSIMs puslapį ir bakstelėkite Įdiegti. Telefono eSIM sąranka atsidaro pati, be jokio QR kodo, kurį reikėtų nuskaityti, ir be naršymo Nustatymuose. Tada įjunkite Duomenų tarptinklinį ryšį ir esate prisijungę.The easiest way: on iPhone (iOS 17.4 or newer), open your eSIM email or My eSIMs page on the iPhone and tap Install. Your iPhone's eSIM setup opens on its own, with no QR code to scan and no digging through Settings. Then switch on Data Roaming and you're online.
Pirkote kompiuteriu ar naudojate senesnį telefoną? Nuskaitykite QR kodą telefonu, su kuriuo keliausite. Visas nuoseklus vadovas pateiktas žemiau.
Prieš pradedant
Kada įdiegti
Įdiekite savo eSIM iki 30 dienų prieš kelionę. Atvykę įjunkite duomenų tarptinklinį ryšį eSIM linijai ir pasirinkite ją mobiliesiems duomenims.
Svarbu
Įsitikinkite, kad jūsų įrenginys yra atrakintam tinklui ir suderinamas su eSIM. Patikrinti suderinamumą
Ką reikia žinoti
- On iPhone you can scan the QR code straight from the Camera app. On Android you must add it from your phone's eSIM settings - a camera or QR-reader app will not install it.On iPhone you can scan the QR code straight from the Camera app, then tap the “Cellular Plan Detected” notification that appears.
- Rankiniam diegimui reikia vieno kodo (Android) arba dviejų kodų (iOS)Manual installation on iPhone requires two codes: the SM-DP+ address and the activation code
- QR kodai turi ribotą naudojimų skaičių – jei pašalinsite eSIM, gali nepavykti jos iš naujo įdiegti
Automatinis diegimas
Telefone bakstelėkite Įdiegti arba nuskaitykite QR kodą iš kito ekrano
(Mygtukas Įdiegti ir QR kodas rodomi po pirkimo ir išsiunčiami el. paštu)

Rankinis diegimas
Pasirinkite savo įrenginio tipą žingsnis po žingsnio instrukcijoms
DIEGIMAS
Patarimas: Prieš pradėdami turėkite paruštą QR kodą ir (arba) rankinio diegimo kodus iš el. pašto.
Greitas būdas: On iPhone only, open the Camera app, scan the QR code and tap the eSIM notification that appears. Then skip to step 6.
Arba sekite šiuos žingsnius:
Eikite į Nustatymus
Bakstelėkite Mobilusis ryšys arba Korinis ryšys
Bakstelėkite Pridėti duomenų planą arba Pridėti eSIM
Bakstelėkite Naudoti QR kodą
Nuskaitykite QR kodą iš el. pašto
Negalite nuskaityti QR kodo? Naudokite rankinį diegimą:
- •Bakstelėkite Įvesti duomenis rankiniu būdu
- •Įveskite SM-DP+ adresą ir Aktyvavimo kodą iš el. pašto
- •Spustelėkite Kitas
Po nuskaitymo arba kodų įvedimo:
Pasirodys jūsų naujas duomenų planas. Spustelėkite Tęsti ir palaukite identifikavimo
Spustelėkite Atlikta. Įveskite PIN kodą, jei prašoma
Pavadinkite savo eSIM skiltyje „Etiketė“ ir spustelėkite Atlikta
Pasirinkite Pagrindinė numatytajai linijai, kad išlaikytumėte savo numerį skambučiams/žinutėms
Pasirinkite Pagrindinė iMessage ir FaceTime
Pasirinkite savo eSIMpass eSIM mobiliesiems duomenims
AKTYVAVIMAS
Pastaba: Aktyvavimas galimas tik atvykus į kelionės tikslą.
Eikite į Nustatymus
Bakstelėkite Mobilusis ryšys arba Korinis ryšys
Pasirinkite savo eSIMpass eSIM iš sąrašo
Įjunkite Įjungti šią liniją
Patikrinkite, ar jūsų eSIMpass eSIM yra pasirinkta kaip numatytoji mobiliesiems/koriniams duomenims
Tap your eSIMpass eSIM again and switch on Data Roaming
Samsung
DIEGIMAS
Patarimas: Turėkite paruštą QR kodą ir (arba) rankinio diegimo kodą iš el. pašto.
Do not use the camera or a QR-scanner app
On Android, scanning the eSIM QR code with the camera or a QR-reader app will not install it - it normally just opens a web page, or does nothing at all. The eSIM can only be added from your phone's own settings, using the steps below.
Follow these steps:
Eikite į Nustatymus
Bakstelėkite Ryšiai
Bakstelėkite SIM tvarkyklė
Skiltyje „eSIM“ bakstelėkite +Pridėti eSIM
Pasirinkite Nuskaityti QR iš paslaugų teikėjo
Nuskaitykite QR kodą ir palaukite identifikavimo
Negalite nuskaityti? Naudokite rankinį diegimą:
- •Bakstelėkite Įvesti aktyvavimo kodą
- •Įveskite rankinio diegimo kodą ir spustelėkite Tęsti
Po nuskaitymo arba kodo įvedimo:
Bakstelėkite Pridėti. Įveskite PIN kodą, jei prašoma
Bakstelėkite savo naują planą ir nustatykite jam Pavadinimą
AKTYVAVIMAS
Pastaba: Aktyvavimas galimas tik kelionės tiksle.
Eikite į Nustatymus → Ryšiai → SIM tvarkyklė
Skiltyje „Pageidaujamos SIM“ bakstelėkite Mobilieji duomenys
Pasirinkite savo eSIMpass eSIM mobiliesiems duomenims
Go to Settings → Connections → Mobile networks and switch on Data roaming
Google Pixel
DIEGIMAS
Patarimas: Turėkite paruštą QR kodą ir (arba) rankinio diegimo kodą iš el. pašto.
Do not use the camera or a QR-scanner app
On Android, scanning the eSIM QR code with the camera or a QR-reader app will not install it - it normally just opens a web page, or does nothing at all. The eSIM can only be added from your phone's own settings, using the steps below.
Follow these steps:
Eikite į Nustatymus
Bakstelėkite Tinklas ir internetas
Bakstelėkite + piktogramą šalia pagrindinio plano
Bakstelėkite Atsisiųsti SIM?
Kai bus klausiama apie 2 SIM naudojimą, bakstelėkite Taip
Bakstelėkite Kitas
Nuskaitykite QR kodą ir palaukite identifikavimo
Negalite nuskaityti? Naudokite rankinį diegimą:
- •Slinkite žemyn ir spustelėkite Reikia pagalbos?
- •Bakstelėkite Įvesti rankiniu būdu
- •Įveskite kodą ir spustelėkite Tęsti
Po nuskaitymo arba kodo įvedimo:
Bakstelėkite Atsisiųsti. Įveskite PIN kodą, jei prašoma
Bakstelėkite savo naują planą ir naudokite redagavimo piktogramą Pavadinimui nustatyti
AKTYVAVIMAS
Pastaba: Aktyvavimas galimas tik kelionės tiksle.
Eikite į Nustatymus → Tinklas ir internetas → SIM
Pasirinkite savo eSIMpass eSIM
Įjunkite Naudoti SIM
Pasirinkite savo eSIMpass eSIM duomenims
On the same eSIMpass eSIM screen, switch on Roaming
If the installation fails
Almost every failed eSIM installation comes down to one of these causes. Check them in order before contacting us.
You were offline during the installation
The eSIM profile is downloaded at the moment you install it, so your phone needs a working internet connection right then - Wi-Fi, or your existing mobile data. Connect first, then add the eSIM again.
Your phone has reached its eSIM profile limit
Phones can only store a limited number of eSIM profiles - typically 8 to 10 on iPhone and 5 to 7 on Samsung and Pixel. Once that limit is reached, new installations fail. Open your eSIM settings, delete profiles from past trips you no longer need, then install again.iPhones can only store a limited number of eSIM profiles - typically 8 to 10. Once that limit is reached, new installations fail. Open Settings > Cellular, delete profiles from past trips you no longer need, then install again.
Only delete old or expired profiles. Never delete the profile for your own home carrier line.
You scanned the QR code in the wrong app
On Android, camera and QR-reader apps cannot install an eSIM. Open your phone's eSIM settings first - on Samsung, Settings > Connections > SIM manager > Add eSIM; on Pixel, Settings > Network & Internet > + > Download a SIM instead? - and only scan the code once you are there.Scan the QR code with the Camera app while it is on screen, then tap the “Cellular Plan Detected” notification. A screenshot opened in Photos will not trigger it - if the code is already saved as an image, use Settings > Cellular > Add eSIM > Use QR Code, or enter the codes by hand.
The QR code has already been used
Each QR code installs one eSIM, on one device. If the profile was already installed - even on a device you later reset - the same code cannot be used again. Look in your phone's list of lines first: if the eSIM is there, turn it on instead of scanning again, and never delete it to retry. Otherwise contact us with your order number and we will check its status.
Your phone is locked to its carrier, or has no eSIM
If your phone says the eSIM is not supported, or to contact your carrier, it is most likely locked: it only accepts its own carrier's lines. On iPhone, Settings > General > About > Carrier Lock should say "No SIM restrictions". Ask your carrier to unlock it. Some phones have no eSIM at all, including many iPhones sold in mainland China, Hong Kong and Macao.
Still stuck? Email help@esimpass.com with your order number and the exact error message shown on your screen, and we will check the eSIM from our side.
Reikia pagalbos?
Mūsų palaikymo komanda pasiruošusi padėti jums prisijungti
Kaip įdiegti savo eSIM
Žiūrėkite mūsų trumpą vadovą, kaip nuskaityti ir aktyvuoti eSIM QR kodą.